Union Community Virdi 4000 Guide de l'utilisateur télécharger pdf (Page 37)

VIRDI 4000 User Guide

Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,

Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,

E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.kr

3.5.3.1. Door opening time settings

◆

[ENTER]  [3]  [3]

◆

(00-30):03

Default setting: ‘03’ (unit: sec.)

This is used to set the door opening time after authentication is successful.

For the strike type, this means the door opening time. For the dead bolt type

or auto door, this time is not effective.

If this is set to ‘00’, the door is out of control, so it may be set to ‘00’ only for

the start/leave time period.

Once the setting is complete, press [ENTER] to move to the next setting.

3.5.3.2. Door status monitor

◆

[ENTER]  [3]  [3]  [ENTER]

◆

[0/1=NO/2=NC]:0

Default setting: ‘0’

- ‘0’: NW – no check

- ‘1’: NO – Dead Bolt Type or auto door

(Lock monitoring is On when the door is locked)

- ‘2’: NC - Strike Type

(Lock monitoring is Off when the door is locked)

‘0’ is for no check, ‘1’ is for dead bolt type or auto door; ‘2’ is for strike type.

When this is set to ‘1’ or ‘2’, the door condition connected to the terminal is

sent to the server periodically.

Once the setting is complete, Press [ENTER] to move to the next setting.

3.5.3.3 Door open alarm settings

(00-30):00

Default setting: ‘00’

The terminal checks if the door has been open for more than setting

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Pas de commentaire

Union Community Virdi 4000 Guide de l'utilisateur Page 37