Union Community VIRDI 3000 Manuel d'utilisateur télécharger pdf (Page 32)

VIRDI 4000

User’s Manual

UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong,

Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,

E-Mail:[email protected], http://www.unioncomm.co.kr/eng

each mode can be used flexibly. If there are more than 10 terminals connected

to the server for simultaneous authentication, or there are frequent network

problems, it is recommended to use “SN” authentication (setting ‘1’).

Press [ENTER] to move to the next setting.

3.4.3. Connection method settings

◆ [*]  [2]  [ENTER]  [ENTER] ◆

Network Type:0

0:Static 1:DHCP

Press [0] for Static IP.

Press [1] for DHCP.

The default is ‘0’ (Static IP). If a static IP is assigned to the terminal from present

network system, press [0]. If there is a DHCP server in network system from

which a dynamic IP is assigned to the terminal, press [1].

Press [ENTER] to move to the next setting.

※ For Static IP settings, refer to ‘3.4.4. IP address’, ‘3.4.5. Subnet mask’ and

‘3.4.6. Gateway’. For dynamic IP, there’s no need for additional settings.

3.4.4. IP address settings

< IP Address >

192.168. 0. 3

Press [#] to delete an old IP and enter the new

IP.

If the IP address is ‘210.98.100.50’, enter as below:

[2] [1] [0] [9] [8] [*] [1] [0] [0] [5] [0]

Press [ENTER] to move to the next setting.

3.4.5. Subnet mask settings

255.255.255. 0

Press [#] to delete an old value and enter the

new value.

If the subnet mask is ‘255.255.255.0’, enter as below:

[2] [5] [5] [2] [5] [5] [2] [5] [5] [0]

Press [ENTER] to move to the next setting.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 58 59

Pas de commentaire

Union Community VIRDI 3000 Manuel d'utilisateur Page 32